 |
» |
|
|
|
 |
Copyright (c) Compaq Computer Corporation 1996, 2001. All rights reserved.
PRODUCT: Compaq DATATRIEVE for OpenVMS, Version 7.1
OP/SYS: Compaq OpenVMS Alpha, Version 7.0
SOURCE: Compaq Computer Corporation
OVERVIEW:
The following information can be used as as a guide in setting up your
system after V7.1 of DATATRIEVE is installed WITHOUT having CDD
installed on the system.
INFORMATION:
When DTR$TOP points to the top root (SYS$SYSDEVICE:[VMS$COMMON.DTR.]) and
your default dictionary (CDD$DEFAULT) falls in a subdirectory of the top
root, define CDD$DEFAULT to point to a CDD$TOP.<path> -- not DTR$TOP.<path>.
For example:
$ define dtr$top SYS$SYSDEVICE:[VMS$COMMON.DTR.]
$ define cdd$default CDD$TOP.DTR$LIB.SMITH
* Note this system has 'NO CDD' installed. CDO.EXE not found.
> DIR SYS$SYSTEM:CD*
Directory SYS$COMMON:[SYSEXE]
CDA$CONVERT.EXE;1 CDA$PACK.EXE;1 CDA$UNPACK.EXE;1 CDU.EXE;1
Total of 4 files.
!
! Show logicals from installation
!
> SHOW LOGICAL DTR$*
(LNM$PROCESS_TABLE)
(LNM$JOB_80D8B980)
(LNM$GROUP_000031)
(LNM$SYSTEM_TABLE)
"DTR$LIBRARY" = "SYS$COMMON:[DTR]"
"DTR$TCPSERVER" = "SYS$SYSTEM:DDMF.COM"
(DECW$LOGICAL_NAMES)
!
! The following logical is defined to prevent DATATRIEVE from invoking
! DECWindows. It can be placed in a user's login file or as a SYSTEM
! logical.
!
> DEFINE DTR$NOWINDOWS TRUE
!
! The following logical MUST be defined and point to a ROOTED-Directory.
! This is the DEFAULT that was taken during the installation. The
! installation used SYS$SYSDEVICE:[VMS$COMMON.DTR] as its installation
! directory. The contents of this directory will contain all the .DAT,
! examples, DABS, and DTR$LIB.DIR. See page 1-7 of DEC DATATRIEVE
! Release Notes.
!
> DEFINE DTR$TOP SYS$SYSDEVICE:[VMS$COMMON.DTR.]
^ DOT must be inserted
!
! Once the above logical DTR$TOP is defined, you can define CDD$DEFAULT to
! point to DTR$TOP. DATATRIEVE checks CDD$DEFAULT at startup even though
! CDD is not installed on the system. You should include DTR$LIB in the
! definition to place you in its directory.
!
> DEFINE CDD$DEFAULT DTR$TOP.DTR$LIB
!
! The above directory DTR$TOP.DTR$LIB should be used to contain the user's
! directories. For example:
!
! DEFINE CDD$DEFAULT DTR$TOP.DTR$LIB.SMITH
!
! Note these are logicals and can be placed in user's login.com files or
! defined as system logicals.
!
! Individual user's should have CDD$DEFAULT defined to their personal
! directory in their login.com file. This is done so that the user
! starting DATATRIEVE will be placed into their directory. For example:
!
!
> DEFINE CDD$DEFAULT DTR$TOP.DTR$LIB.SMITH
> DTR
DEC DATATRIEVE V7.1
Digital Query and Report System
Type HELP for help
!
DTR> SHOW DICTIONARY
The default directory is CDD$DEFAULT
= DTR$TOP.DTR$LIB.SMITH
DTR> SHOW ALL
Dictionaries:
The default directory is CDD$DEFAULT
= DTR$TOP.DTR$LIB.SMITH
No established collections.
No ready sources.
No loaded tables.
!
! You can create the directory for the user from within DATATRIEVE or from
! the DCL level.
!
DTR> DEFINE DICTIONARY DTR$TOP.DTR$LIB.SMITH
DTR> SHOW DICTIONARIES
Dictionaries:
ADT DEMO FORMS
GUIDE PLOTS SMITH
!
OR from DCL:
!
! SYS$SYSDEVICE:[VMS$COMMON.DTR.DTR$LIB]
!
> SET DEF SYS$SYSDEVICE:[VMS$COMMON.DTR.DTR$LIB]
> DIR
Directory SYS$SYSDEVICE:[VMS$COMMON.DTR.DTR$LIB]
ADT.DIR;1 DEMO.DIR;1 FORMS.DIR;1
GUIDE.DIR;1 JPI_CODES_TAB.DTR;1 PLOTS.DIR;1
Total of 9 files.
!
! Create the directory
!
> CREATE/DIR [.SMITH]
> DIR
Directory SYS$SYSDEVICE:[VMS$COMMON.DTR.DTR$LIB]
ADT.DIR;1 DEMO.DIR;1 FORMS.DIR;1
GUIDE.DIR;1 JPI_CODES_TAB.DTR;1
PLOTS.DIR;1 SMITH.DIR;1
^^^^^^^^^^^
Total of 10 files.
!
! Now you can define the logical CDD$DEFAULT as:
!
! DEFINE CDD$DEFAULT DTR$TOP.DTR$LIB.SMITH
!
> SHOW DEFAULT
SYS$SYSDEVICE:[VMS$COMMON.DTR.DTR$LIB.SMITH]
> CREATE/DIR [.TEST]
> DTR
DEC DATATRIEVE V7.1
Digital Query and Report System
Type HELP for help
DTR> SHOW DICTIONARIES
Dictionaries:
TEST
!
!
> DEFINE CDD$DEFAULT DTR$TOP.DTR$LIB.SMITH
%DCL-I-SUPERSEDE, previous value of CDD$DEFAULT has been superseded
> DTR
DEC DATATRIEVE V7.1
Digital Query and Report System
Type HELP for help
DTR> SHOW ALL
Dictionaries:
TEST
The default directory is CDD$DEFAULT
= DTR$TOP.DTR$LIB.SMITH
No established collections.
No ready sources.
No loaded tables.
!
!
RUN SYS$SYSTEM: DTR32
!
DEC DATATRIEVE V7.1
Digital Query and Report System
Type HELP for help
!
DTR> SHOW DICTIONARY
The default directory is CDD$DEFAULT
= DTR$TOP.DTR$LIB.SMITH
DTR> SHOW ALL
Dictionaries:
TEST
The default directory is CDD$DEFAULT
= DTR$TOP.DTR$LIB.SMITH
No established collections.
No ready sources.
No loaded tables.
!
DTR> SET DICTIONARY DTR$TOP.DTR$LIB
DTR> SHOW ALL
Tables:
JPI_CODES;1
Dictionaries:
ADT DEMO FORMS
GUIDE PLOTS SMITH
The default directory is DTR$TOP.DTR$LIB
No established collections.
No ready sources.
No loaded tables.
!
!
DTR> SET DICTIONARY DTR$TOP.DTR$LIB.SMITH
DTR> SHOW ALL
Dictionaries:
TEST
The default directory is CDD$DEFAULT
= DTR$TOP.DTR$LIB.SMITH
No established collections.
No ready sources.
No loaded tables.
!
!
! Checking from a DCL view point.
!
> SHOW LOG DTR$TOP
"DTR$TOP" = "SYS$SYSDEVICE:[VMS$COMMON.DTR.]" (LNM$PROCESS_TABLE)
> SET DEFAULT SYS$SYSDEVICE:[VMS$COMMON.DTR]
^ Note No Dot
> DIR
Directory SYS$SYSDEVICE:[VMS$COMMON.DTR]
ACCOUNTS.DAT;1 ANNUAL.DAT;1 CALCULATE.FOR;1 CHOOSE.FOR;1
COLUMNS.BAS;1 COMMON.FOR;1 CORRELATE.FOR;1 DAB.BAS;1
DAB.FOR;1 DAB.H;1 DAB.LIB;1 DAB.PAS;1
DAB.PLI;1 DISPLAY.FOR;1 DTR$DECTERM_DEFAULT.DAT;1
DTR$LIB.DIR;1 DTRAPI.BAS;1 DTRAPI.DLL;1 DTRAPI.LIB;1
DTRAPI.OLB;1 DTRAPI32.DLL;1 DTRAPI32.LIB;1 DTRAXP071.DAT;1
DTRBLD.COM;1 DTRDNP.DLL;1 DTREXTRE.C;1 DTREXTRE.OBJ;1
DTRFND.MAR;1 DTRFND.OBJ;1 DTRFND_SINGLE_PRECISION.MAR;1
DTRFNLB.MLB;1 DTRFUN.OLB;1 DTRLIB.OLB;1 DTRMSGS.MEM;1
DTRMSGS.MSG;1 DTRTEXT.MAR;1 DTRTXTLIB.MLB;1 ENTRY.COB;1
ESTABLISH.FOR;1 EXAMPLE.BAS;1 EXAMPLE.C;1 EXAMPLE.COB;1
EXAMPLE.FOR;1 EXAMPLE.PAS;1 EXAMPLE.PLI;1 FAMILY.DAT;1
FAMILY.FORM;1 FAMILY.IFDL;1 FORMS.FLB;1 IDTRFND.MAR;1
INFO.BAS;1 INFO.COB;1 INFO.FOR;1 INFO.H;1
INFO.MAR;1 INFO.PAS;1 INFO.PLI;1 INFO.REQ;1
LINEAR.BAS;1 LINEAR.C;1 LOAD_ADT.DTR;1 LOAD_DAB.DDL;1
LOAD_DATA_CDO.DTR;1 LOAD_DATA_DMU.DTR;1 LOAD_DBMS.DTR;1 LOAD_FORMS.DTR;1
LOAD_RDB.DTR;1 LOAD_UETP.DTR;1 MENU.FOR;1 MESSAGE.FOR;1
MODIFY.FOR;1 NEWUSER.COM;1 OWNER.DAT;1 OWNER.SEQ;1
PARSE.FOR;1 PAYABLES.DAT;1 PAYROLL.COB;1 PERSON.DAT;1
PET.DAT;1 PROJECT.DAT;1 REMOTE_DECTERM.COM;1
REPORT.FOR;1 SAILBOAT.IFDL;1 SALES.DAT;1 SORT.FOR;1
STORE.FOR;1 TERMSERVE.OLB;1 UPDATE.COB;1 VBLINEA.BAS;1
VBLINEA.FRM;1 VBLINEA.MAK;1 VBLINEA1.FRM;1 VBLINEA2.FRM;1
YACHT.DAT;1 YACHT.FORM;1 YACHT.IFDL;1 YACHT.SEQ;1
Total of 97 files.
!
! Check for directory DTR$LIB.
!
> DIR *.DIR
Directory SYS$SYSDEVICE:[VMS$COMMON.DTR]
DTR$LIB.DIR;1
Total of 1 file.
> SET DEFAULT SYS$SYSDEVICE:[VMS$COMMON.DTR.DTR$LIB]
> DIR
Directory SYS$SYSDEVICE:[VMS$COMMON.DTR.DTR$LIB]
ADT.DIR;1 DEMO.DIR;1 FORMS.DIR;1 GUIDE.DIR;1
JPI_CODES_TAB.DTR;1 PLOTS.DIR;1 SMITH.DIR;1
^^^^^^^^^^^
Total of 7 files.
> SET DEFAULT SYS$SYSDEVICE:[VMS$COMMON.DTR.DTR$LIB.SMITH]
> DIR
Directory SYS$SYSDEVICE:[VMS$COMMON.DTR.DTR$LIB.SMITH]
TEST.DIR;1
Total of 1 file.
!
! From here the user can create or insert their procedures, records, and
! domains.
RELATED ARTICLES:
Another article in the DATATRIEVE database describes this topic. The
article can be found using a search string of:
Installation On ALPHA With No CDD On System
REFERENCES:
"DEC DATATRIEVE", January 1996, (AA-QN5UA-TE)
All trademarks and registered trademarks are the property of
their respective owners.
All product names referenced herein are trademarks of their
respective companies.
|
|
|
buy online or call 1.800.AT.COMPAQ
|
|
